An anti-reverse switch is usually located at the bottom of a spinning reel, and it is very helpful during the battle with a fish. Typically, it engages the drag and prevents the tackle from spinning backward.
Some modern spinning tackles come with a switch that allows you to choose when to engage the anti-reverse switch and when not to. For the best performance, don’t switch the button in a way that it will allow the handle to turn forward and backward.
When it is switched on, you can rely on the anti-reverse to provide the fishing line with enough tension. However, it is worth noting that the tension provided by the anti-reverse feature may not be enough for larger fish like catfish. For that reason, I only recommend relying on the anti-reverse for smaller fish like bass and trout. If you plan to catch larger fish, rely on the drag itself.
Always set the anti-reverse switch “on” and don’t touch it again. Switching it “off” allows the reel to move in all directions, which increases the risk of losing or hurting fish and line tangles. You don’t have to switch it on and off during every fishing trip. Just set it on and leave it.
People Also Ask
Fishing is fun, but you need to know several things to get the best out of your experience. I hope answers to some common questions about spincasting will make your fishing experience even more fun.
Why Do Spinning Reel Spin Backwards?
Typically, your tackle should not turn backward. If it does, it means you have switched “off” the anti-reverse button, or it has a problem. If you click the button and the tackle still spins backward, your reel has a mechanical problem. Take it to an expert for repair. If you continue using it like that, you will increase the risk of losing a fish or hurting it. Also, it increases the risk for line knots and tangles.
Are All Spinning Reels Reversible?
Typically, you can use a spinning tackle with whichever hand you choose. However, it is advisable to choose a spinning tackle with a handle in your less dominant hand. For example, if you are right-handed, you should choose a left-handed tackle. That way, your dominant hand (right hand) will hold the rod while your left hand will hold the reel handle that requires less work.
If you’ve already purchased fishing gear of the opposite hand, you can still turn the reel handle to your less dominant hand for the best experience. All you need to do is remove the dust cap from its space and put the reel handle there. Then, screw the dust cap where the reel handle was. Do that, and you are good to go.
What are the Parts of a Spinning Reel?
A spinning tackle is made of various parts that work together to make your fishing experience easier and more fun. These parts include reel handle, body, gearbox, spool, drag adjustment knob, bail, and anti-reverse switch. If one part fails to work, your reel will not work as it should. For example, if the drag adjustment knob fails to work, the likelihood of losing a fish increases drastically.
Also Read : Can You Use a Spinning Reel on a Casting Rod ?
How Much Line Should Be On My Spinning Reel?
Typically, that depends on the size of the spool and the type of fishing line you are using. If your tackle’s spool is large enough, it can take enough line to cast over long distances and fish in deep areas. The braided line is super strong yet very thin. This means your reel is likely to take more braided line than fluorocarbon or monofilament.
That said, you should never fill the spool to the brim. If you do so, you will have casting problems since the line will start coming off the spool the moment you flip the bail. You should not underfill it either. If you don’t put enough line to the spool, it will increase the friction, which will affect the casting distance. For the best performance, leave about 1/8 of an inch on the spool.
How Do I Choose a Spinning Reel?
To choose the right spinning reel, you will need to consider a few vital factors. These factors include:
Spinning tackles are quite affordable, but some are expensive than others. Therefore, only choose a tackle within your budget.
Related : Best Budget Spinning Reel in the Market
Make sure that the reel is compatible with the fishing rod you plan to use. If possible, buy both at the same time.
The material used to craft the tackle will probably determine its durability. For example, a reel made of metal blanks is likely to last longer than one made of plastic.
The number of ball bearings:
The ball bearings in a tackle smoothens its performance. Typically, the higher the number of bearings, the smoother the performance is likely to be.
Your fishing location:
If you plan to trawl in the open sea, you will probably need a large or extra-large tackle. In the open sea, there are larger species, and you will need a tackle that can handle them.
As a beginner, you should always go for tackles that have been identified as beginner-friendly. Such reels are easier to cast, and they will make your experience much more comfortable.
You should purchase a lightweight tackle that will not leave you too tired after every fishing trip.
The higher the gear ratio, the faster the retrieval speed will be. Consider purchasing a reel with a gear ratio of at least 4:1.
Choose a tackle with an anti-reverse switch.
Make sure the handles of the reel are comfortable enough for you. Ideally, go for EVA or Cork handles. They are considered the best.
Why is My Reel Not Locking?
The main reason your tackle is not locking is the bail wire is broken. Take it to an expert, and he will fix the problem for you.
Hopefully, you have learned the basics about spinning tackles and, more especially, about the anti-reverse switch. Now, you can go out and enjoy fishing without making common fishing mistakes, such as switching the anti-reverse button “off.”